DC fast chargers convert AC power to DC within the charging station and deliver DC power directly to the battery, which is why they charge.
DC fast chargers (Level 3) with power output from 240kW to 480kW;With us dc fast chargers, you can charge in as little as 30 minutes! Learn more about EV charging speeds at our fast charging stations.
Product parameters of dc fast charger for ev from 240kW to 480kW:
| Parameters | Requirements | ||
| General Requirements | |||
| EV Charger Type | DC | ||
| Charger Capacity | 240KW | 360KW | 480KW |
| Equipment size | L1200*W750*H1980(mm) | ||
| Product Model NO. | ENC-DCF240D | ENC-DCF360F | ENC-DCF480H |
| ANSI-DCF240D | ANSI-DCF360F | ANSI-DCF480H | |
| JIS-DCF240D | JIS-DCF360F | JIS-DCF480H | |
| Mounting | Ground-Mounted(Sequential) | ||
| Input Requirements | |||
| AC Supply System | Three-Phase, 5 Wire AC system | ||
| Nominal Input Voltage | AC380V±15% | ||
| Input Frequency | 45-65Hz | ||
| Environmental Requirements | |||
| Ambient Temperature Range | -25 to 55°C | ||
| Ambient Humidity | 5 to 95% | ||
| Storage Temperature | -40 to 70°C | ||
| Electrical indicators | |||
| Current Limit Protection Value | ≥110% | ||
| Steady pressure precision | ≤±0.5% | ||
| Steady flow accuracy | ≤±1% | ||
| Power Factor | ≥0.99(50% load above) | ||
| Mechanical Requirements | |||
| IP Ratings | IP 54 | ||
| Cooling | Air-cooled | ||
| Output Requirements | |||
| Connector Terminal | 2 | 3 | 4 |
| Number of Outputs | 4 | 6 | 8 |
| Type of Each Output | DC200-750V ; DC150-500V(JIS) | ||
| Single Output Max.Current | 200 Amp | ||
| Equipment size | L430*W201*H1600(mm) | ||
| User Interface & Display Requirements | |||
| Display & Touch-Screen Size | 7 Inches Touch Screen with Shell | ||
| User Authentication | QR Code/RFID Card /Password Login | ||
| Metering Information | Consumption Units | ||
| Communication Requirements | |||
| Communication between EVSE and Central server | OCPP 1.6J Protocol (Optional) | ||
| Interface between Charger and CMS | Ethernet/3G/4G/WIFI (Optional) | ||
| Protection & Safety Requirements | |||
| Executive Standard | IEC 62196 2017, IEC 61851 2017, SAE J1772,CHAdeMO etc. | ||
| Safety Parameters | Over Current, Over Voltage, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc. | ||
